plasma2350(w): Fix flash size to be 4MB instead of 8MB.

Should prevent builds from self destructing when a user saves a file.

.github/workflows/micropython.yml

@@ -7,9 +7,9 @@ on:
     types: [created]
 
 env:
-  MICROPYTHON_VERSION: feature/psram
+  MICROPYTHON_VERSION: feature/psram-and-wifi
   MICROPYTHON_FLAVOUR: pimoroni
-  PIMORONI_PICO_VERSION: feature/sdk-2.0.0
+  PIMORONI_PICO_VERSION: main
 
 jobs:
   build:
@@ -21,15 +21,24 @@ jobs:
         include:
         - name: pico2_rp2350
           board: RPI_PICO2
+        - name: pico2_rp2350_wireless
+          board: RPI_PICO2
+          variant: WIRELESS
         - name: pico2b_rp2350
           board: RPI_PICO2B
         - name: plasma2350
           board: PIMORONI_PLASMA2350
+        - name: plasma2350_wireless
+          board: PIMORONI_PLASMA2350
+          variant: WIRELESS
         - name: tiny2350
           board: PIMORONI_TINY2350
         - name: pico_plus2_rp2350_psram
           board: PIMORONI_PICO_PLUS2
           variant: PSRAM
+        - name: pico_plus2_rp2350_wireless
+          board: PIMORONI_PICO_PLUS2
+          variant: WIRELESS
         - name: pico_plus2_rp2350
           board: PIMORONI_PICO_PLUS2
 
@@ -70,7 +79,7 @@ jobs:
     - name: Install Arm GNU Toolchain (arm-none-eabi-gcc)
       uses: carlosperate/arm-none-eabi-gcc-action@v1
       with:
-        release: '9-2020-q2'
+        release: '13.3.Rel1'
 
     - name: Install CCache
       run: |

micropython/board/PIMORONI_PICO_PLUS2/manifest-wireless.py

@@ -0,0 +1,8 @@
+require("bundle-networking")
+
+# Bluetooth
+require("aioble")
+
+include("manifest.py")
+
+freeze("$(BOARD_DIR)/../../modules_py", "lte.py")

micropython/board/PIMORONI_PICO_PLUS2/mpconfigboard.h

@@ -1,8 +1,79 @@
 // Board and hardware specific configuration
-#ifndef MICROPY_HW_BOARD_NAME
-// Might be defined by mpconfigvariant.cmake
-#define MICROPY_HW_BOARD_NAME                   "Pimoroni Pico Plus 2"
-#endif
 #define MICROPY_HW_FLASH_STORAGE_BYTES          (PICO_FLASH_SIZE_BYTES - (2 * 1024 * 1024))
 
 #define MICROPY_HW_PSRAM_CS_PIN                 PIMORONI_PICO_PLUS2_PSRAM_CS_PIN
+
+#ifndef CYW43_WL_GPIO_COUNT
+// Effecively remaps LEDW,EXT_GPIO0 to GPIO25 on non-W builds
+#define pin_EXT_GPIO0                           pin_GPIO25
+// Shim the EXT GPIOs because we can't specify a variant pins.csv
+#define pin_EXT_GPIO1                           pin_GPIO1
+#define pin_EXT_GPIO2                           pin_GPIO2
+#endif
+
+// Might be defined in mpconfigvariant_PSRAM.cmake
+// or mpconfigvariant_WIRELESS.cmake
+#if defined(MICROPY_HW_ENABLE_PSRAM)
+
+#define MICROPY_GC_SPLIT_HEAP                   (1)
+
+#endif
+
+// Set up networking.
+#define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT     "PPP2"
+
+#if defined(MICROPY_PY_NETWORK_CYW43)
+
+// CYW43 driver configuration.
+#define CYW43_USE_SPI                           (1)
+#define CYW43_LWIP                              (1)
+#define CYW43_GPIO                              (1)
+#define CYW43_SPI_PIO                           (1)
+
+#define MICROPY_HW_PIN_EXT_COUNT                CYW43_WL_GPIO_COUNT
+
+#if defined(CYW43_PIN_WL_DYNAMIC)
+
+#define CYW43_PIO_CLOCK_DIV_DYNAMIC             (1)
+
+// Defined by pimoroni_pico_plus2w_rp2350.h
+//#define CYW43_DEFAULT_PIN_WL_HOST_WAKE          SPICE_RESET_MOSI_PIN
+//#define CYW43_DEFAULT_PIN_WL_REG_ON             SPICE_TX_MISO_PIN
+#define CYW43_DEFAULT_PIN_WL_DATA_OUT           CYW43_DEFAULT_PIN_WL_HOST_WAKE
+#define CYW43_DEFAULT_PIN_WL_DATA_IN            CYW43_DEFAULT_PIN_WL_HOST_WAKE
+#define CYW43_DEFAULT_PIN_WL_CLOCK              29u
+#define CYW43_DEFAULT_PIN_WL_CS                 25u
+
+/* SPICE alternative 
+#define CYW43_DEFAULT_PIN_WL_HOST_WAKE          SPICE_RESET_MOSI_PIN
+#define CYW43_DEFAULT_PIN_WL_REG_ON             SPICE_TX_MISO_PIN
+#define CYW43_DEFAULT_PIN_WL_DATA_OUT           SPICE_RESET_MOSI_PIN
+#define CYW43_DEFAULT_PIN_WL_DATA_IN            SPICE_RESET_MOSI_PIN
+#define CYW43_DEFAULT_PIN_WL_CLOCK              SPICE_NETLIGHT_SCK_PIN
+#define CYW43_DEFAULT_PIN_WL_CS                 SPICE_RX_CS_PIN
+*/
+
+// Slow down the wireless clock, since we'll be running
+// comms through wiring spaghetti!
+#define CYW43_PIO_CLOCK_DIV_INT                 50
+#define CYW43_PIO_CLOCK_DIV_FRAC                0
+#define CYW43_SPI_PROGRAM_NAME                  spi_gap0_sample1
+
+#endif
+
+#endif
+
+// Might be defined in mpconfigvariant_PPP.cmake
+// This is not checked by mpconfigport.h so we must set up networking below
+#if defined(MICROPY_PY_NETWORK_PPP_LWIP)
+
+// Nothing to do here?
+
+#endif
+
+// If a variant is not used, define a fallback board name
+#ifndef MICROPY_HW_BOARD_NAME
+
+#define MICROPY_HW_BOARD_NAME                   "Pimoroni Pico Plus 2"
+
+#endif

micropython/board/PIMORONI_PICO_PLUS2/mpconfigvariant_PSRAM.cmake

@@ -1,6 +1,6 @@
 # Override the MicroPython board name
+# And set basic options which are expanded upon in mpconfigboard.h
 list(APPEND MICROPY_DEF_BOARD
-    "MICROPY_HW_ENABLE_PSRAM=1"
-    "MICROPY_GC_SPLIT_HEAP=1"
     "MICROPY_HW_BOARD_NAME=\"Pimoroni Pico Plus 2 (PSRAM)\""
+    "MICROPY_HW_ENABLE_PSRAM=1"
 )

micropython/board/PIMORONI_PICO_PLUS2/mpconfigvariant_WIRELESS.cmake

@@ -0,0 +1,41 @@
+# Override the MicroPython board name
+# And set basic options which are expanded upon in mpconfigboard.h
+list(APPEND MICROPY_DEF_BOARD
+    "MICROPY_HW_BOARD_NAME=\"Pimoroni Pico Plus 2 (Wireless + PSRAM)\""
+    "MICROPY_HW_ENABLE_PSRAM=1"
+    "MICROPY_PY_NETWORK=1"
+    "CYW43_PIN_WL_DYNAMIC=1"
+    "MICROPY_PY_NETWORK_PPP_LWIP=1"
+)
+
+# Links micropy_lib_lwip and sets MICROPY_PY_LWIP = 1
+# Picked up and expanded upon in mpconfigboard.h
+set(MICROPY_PY_LWIP ON)
+
+# Links cyw43-driver and sets:
+# MICROPY_PY_NETWORK_CYW43 = 1,
+# MICROPY_PY_SOCKET_DEFAULT_TIMEOUT_MS = 30000
+set(MICROPY_PY_NETWORK_CYW43 ON)
+
+# Adds mpbthciport.c
+# And sets:
+# MICROPY_PY_BLUETOOTH = 1,
+# MICROPY_PY_BLUETOOTH_USE_SYNC_EVENTS = 1,
+# MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE = 1
+set(MICROPY_PY_BLUETOOTH ON)
+
+# Links pico_btstack_hci_transport_cyw43
+# And sets:
+# MICROPY_BLUETOOTH_BTSTACK = 1,
+# MICROPY_BLUETOOTH_BTSTACK_CONFIG_FILE =
+set(MICROPY_BLUETOOTH_BTSTACK ON)
+
+# Sets:
+# CYW43_ENABLE_BLUETOOTH = 1,
+# MICROPY_PY_BLUETOOTH_CYW43 = 1
+set(MICROPY_PY_BLUETOOTH_CYW43 ON)
+
+set(MICROPY_FROZEN_MANIFEST ${MICROPY_BOARD_DIR}/manifest-wireless.py)
+
+set(PICO_BOARD "pimoroni_pico_plus2w_rp2350")
+set(PICO_BOARD_HEADER_DIRS ${CMAKE_CURRENT_LIST_DIR})

micropython/board/PIMORONI_PICO_PLUS2/pimoroni_pico_plus2w_rp2350.h

@@ -0,0 +1,136 @@
+/*
+ * Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+// -----------------------------------------------------
+// NOTE: THIS HEADER IS ALSO INCLUDED BY ASSEMBLER SO
+//       SHOULD ONLY CONSIST OF PREPROCESSOR DIRECTIVES
+// -----------------------------------------------------
+
+// This header may be included by other board headers as "boards/pimoroni_pico_plus2w_rp2350.h"
+
+// pico_cmake_set PICO_PLATFORM=rp2350
+
+#ifndef _BOARDS_PIMORONI_PICO_PLUS2W_RP2350_H
+#define _BOARDS_PIMORONI_PICO_PLUS2W_RP2350_H
+
+// For board detection
+#define PIMORONI_PICO_PLUS2_RP2350
+#define PIMORONI_PICO_PLUS2W_RP2350
+
+// --- BOARD SPECIFIC ---
+#define SPICE_SPI 0
+#define SPICE_TX_MISO_PIN 32
+#define SPICE_RX_CS_PIN 33
+#define SPICE_NETLIGHT_SCK_PIN 34
+#define SPICE_RESET_MOSI_PIN 35
+#define SPICE_PWRKEY_BL_PIN 36
+
+#define PIMORONI_PICO_PLUS2_USER_SW_PIN 45
+#define PIMORONI_PICO_PLUS2_PSRAM_CS_PIN 47
+
+// -- CYW43 Wireless --
+#ifndef CYW43_DEFAULT_PIN_WL_HOST_WAKE
+#define CYW43_DEFAULT_PIN_WL_HOST_WAKE 24
+#endif
+
+#ifndef CYW43_DEFAULT_PIN_WL_REG_ON
+#define CYW43_DEFAULT_PIN_WL_REG_ON 23
+#endif
+
+#ifndef CYW43_WL_GPIO_COUNT
+#define CYW43_WL_GPIO_COUNT 3
+#endif
+
+#ifndef CYW43_WL_GPIO_LED_PIN
+#define CYW43_WL_GPIO_LED_PIN 0
+#endif
+
+// If CYW43_WL_GPIO_VBUS_PIN is defined then a CYW43 GPIO has to be used to read VBUS.
+// This can be passed to cyw43_arch_gpio_get to determine if the device is battery powered.
+// PICO_VBUS_PIN and CYW43_WL_GPIO_VBUS_PIN should not both be defined.
+
+// no CYW43_WL_GPIO_VBUS_PIN
+
+// If CYW43_USES_VSYS_PIN is defined then CYW43 uses the VSYS GPIO (defined by PICO_VSYS_PIN) for other purposes.
+// If this is the case, to use the VSYS GPIO it's necessary to ensure CYW43 is not using it.
+// This can be achieved by wrapping the use of the VSYS GPIO in cyw43_thread_enter / cyw43_thread_exit.
+
+// no CYW43_USES_VSYS_PIN
+
+// --- UART ---
+#ifndef PICO_DEFAULT_UART
+#define PICO_DEFAULT_UART 0
+#endif
+#ifndef PICO_DEFAULT_UART_TX_PIN
+#define PICO_DEFAULT_UART_TX_PIN 0
+#endif
+#ifndef PICO_DEFAULT_UART_RX_PIN
+#define PICO_DEFAULT_UART_RX_PIN 1
+#endif
+
+// --- LED ---
+#ifndef PICO_DEFAULT_LED_PIN
+#define PICO_DEFAULT_LED_PIN 25
+#endif
+// no PICO_DEFAULT_WS2812_PIN
+
+// --- I2C ---
+#ifndef PICO_DEFAULT_I2C
+#define PICO_DEFAULT_I2C 0
+#endif
+#ifndef PICO_DEFAULT_I2C_SDA_PIN
+#define PICO_DEFAULT_I2C_SDA_PIN 4
+#endif
+#ifndef PICO_DEFAULT_I2C_SCL_PIN
+#define PICO_DEFAULT_I2C_SCL_PIN 5
+#endif
+
+// --- SPI ---
+#ifndef PICO_DEFAULT_SPI
+#define PICO_DEFAULT_SPI 0
+#endif
+#ifndef PICO_DEFAULT_SPI_SCK_PIN
+#define PICO_DEFAULT_SPI_SCK_PIN SPICE_NETLIGHT_SCK_PIN
+#endif
+#ifndef PICO_DEFAULT_SPI_TX_PIN
+#define PICO_DEFAULT_SPI_TX_PIN SPICE_RESET_MOSI_PIN
+#endif
+#ifndef PICO_DEFAULT_SPI_RX_PIN
+#define PICO_DEFAULT_SPI_RX_PIN SPICE_TX_MISO_PIN
+#endif
+#ifndef PICO_DEFAULT_SPI_CSN_PIN
+#define PICO_DEFAULT_SPI_CSN_PIN SPICE_RX_CS_PIN
+#endif
+
+// --- FLASH ---
+
+#define PICO_BOOT_STAGE2_CHOOSE_W25Q080 1
+
+#ifndef PICO_FLASH_SPI_CLKDIV
+#define PICO_FLASH_SPI_CLKDIV 2
+#endif
+
+// pico_cmake_set_default PICO_FLASH_SIZE_BYTES = (16 * 1024 * 1024)
+#ifndef PICO_FLASH_SIZE_BYTES
+#define PICO_FLASH_SIZE_BYTES (16 * 1024 * 1024)
+#endif
+
+// The GPIO Pin used to read VBUS to determine if the device is battery powered.
+#ifndef PICO_VBUS_PIN
+#define PICO_VBUS_PIN 24
+#endif
+
+// The GPIO Pin used to monitor VSYS. Typically you would use this with ADC.
+// There is an example in adc/read_vsys in pico-examples.
+#ifndef PICO_VSYS_PIN
+#define PICO_VSYS_PIN 43
+#endif
+
+#ifndef PICO_RP2350_A2_SUPPORTED
+#define PICO_RP2350_A2_SUPPORTED 1
+#endif
+
+#endif

micropython/board/PIMORONI_PICO_PLUS2/pins.csv

@@ -44,4 +44,13 @@ GP44,GPIO44
 GP45,GPIO45
 GP46,GPIO46
 GP47,GPIO47
-LED,GPIO25
+LED,GPIO25
+LEDW,EXT_GPIO0
+WL_GPIO0,EXT_GPIO0
+WL_GPIO1,EXT_GPIO1
+WL_GPIO2,EXT_GPIO2
+SPICE_TX,GPIO32
+SPICE_RX,GPIO33
+SPICE_NETLIGHT,GPIO34
+SPICE_RESET,GPIO35
+SPICE_PWRKEY,GPIO36

micropython/board/PIMORONI_PLASMA2350/manifest-wireless.py

@@ -0,0 +1,8 @@
+require("bundle-networking")
+
+# Bluetooth
+require("aioble")
+
+include("manifest.py")
+
+freeze("$(BOARD_DIR)/../../modules_py", "lte.py")

micropython/board/PIMORONI_PLASMA2350/mpconfigboard.cmake

@@ -6,3 +6,6 @@ set(PICO_PLATFORM "rp2350")
 set(MICROPY_FROZEN_MANIFEST ${MICROPY_BOARD_DIR}/manifest.py)
 
 set(MICROPY_C_HEAP_SIZE 4096)
+
+set(PICO_BOARD "pimoroni_plasma2350")
+set(PICO_BOARD_HEADER_DIRS ${CMAKE_CURRENT_LIST_DIR})

micropython/board/PIMORONI_PLASMA2350/mpconfigboard.h

@@ -1,7 +1,73 @@
 // Board and hardware specific configuration
-#define MICROPY_HW_BOARD_NAME                   "Pimoroni Plasma 2350"
 #define MICROPY_HW_FLASH_STORAGE_BYTES          (PICO_FLASH_SIZE_BYTES - (2 * 1024 * 1024))
 
+#ifndef CYW43_WL_GPIO_COUNT
+// Shim the EXT GPIOs because we can't specify a variant pins.csv
+// Remap them to LED R, G and B respectively on non-W builds
+#define pin_EXT_GPIO0                           pin_GPIO16
+#define pin_EXT_GPIO1                           pin_GPIO17
+#define pin_EXT_GPIO2                           pin_GPIO18
+#endif
+
 // I2C0 (non-default)
 #define MICROPY_HW_I2C0_SCL  (PLASMA2350_SDA_PIN)
-#define MICROPY_HW_I2C0_SDA  (PLASMA2350_SCL_PIN)
+#define MICROPY_HW_I2C0_SDA  (PLASMA2350_SCL_PIN)
+
+// Set up networking.
+#define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT     "PLASMA2350"
+
+#if defined(MICROPY_PY_NETWORK_CYW43)
+
+// CYW43 driver configuration.
+#define CYW43_USE_SPI                           (1)
+#define CYW43_LWIP                              (1)
+#define CYW43_GPIO                              (1)
+#define CYW43_SPI_PIO                           (1)
+
+#define MICROPY_HW_PIN_EXT_COUNT                CYW43_WL_GPIO_COUNT
+
+#if defined(CYW43_PIN_WL_DYNAMIC)
+
+#define CYW43_PIO_CLOCK_DIV_DYNAMIC             (1)
+
+// Defined by pimoroni_pico_plus2w_rp2350.h
+//#define CYW43_DEFAULT_PIN_WL_HOST_WAKE          SPICE_RESET_MOSI_PIN
+//#define CYW43_DEFAULT_PIN_WL_REG_ON             SPICE_TX_MISO_PIN
+#define CYW43_DEFAULT_PIN_WL_DATA_OUT           CYW43_DEFAULT_PIN_WL_HOST_WAKE
+#define CYW43_DEFAULT_PIN_WL_DATA_IN            CYW43_DEFAULT_PIN_WL_HOST_WAKE
+#define CYW43_DEFAULT_PIN_WL_CLOCK              29u
+#define CYW43_DEFAULT_PIN_WL_CS                 25u
+
+/* SPICE alternative 
+#define CYW43_DEFAULT_PIN_WL_HOST_WAKE          SPICE_RESET_MOSI_PIN
+#define CYW43_DEFAULT_PIN_WL_REG_ON             SPICE_TX_MISO_PIN
+#define CYW43_DEFAULT_PIN_WL_DATA_OUT           SPICE_RESET_MOSI_PIN
+#define CYW43_DEFAULT_PIN_WL_DATA_IN            SPICE_RESET_MOSI_PIN
+#define CYW43_DEFAULT_PIN_WL_CLOCK              SPICE_NETLIGHT_SCK_PIN
+#define CYW43_DEFAULT_PIN_WL_CS                 SPICE_RX_CS_PIN
+*/
+
+// Slow down the wireless clock, since we'll be running
+// comms through wiring spaghetti!
+#define CYW43_PIO_CLOCK_DIV_INT                 50
+#define CYW43_PIO_CLOCK_DIV_FRAC                0
+#define CYW43_SPI_PROGRAM_NAME                  spi_gap0_sample1
+
+#endif
+
+#endif
+
+// Might be defined in mpconfigvariant_PPP.cmake
+// This is not checked by mpconfigport.h so we must set up networking below
+#if defined(MICROPY_PY_NETWORK_PPP_LWIP)
+
+// Nothing to do here?
+
+#endif
+
+// If a variant is not used, define a fallback board name
+#ifndef MICROPY_HW_BOARD_NAME
+
+#define MICROPY_HW_BOARD_NAME                   "Pimoroni Plasma 2350"
+
+#endif

micropython/board/PIMORONI_PLASMA2350/mpconfigvariant_WIRELESS.cmake

@@ -0,0 +1,40 @@
+# Override the MicroPython board name
+# And set basic options which are expanded upon in mpconfigboard.h
+list(APPEND MICROPY_DEF_BOARD
+    "MICROPY_HW_BOARD_NAME=\"Pimoroni Plasma 2350 (LTE + WiFi)\""
+    "MICROPY_PY_NETWORK=1"
+    "CYW43_PIN_WL_DYNAMIC=1"
+    "MICROPY_PY_NETWORK_PPP_LWIP=1"
+)
+
+# Links micropy_lib_lwip and sets MICROPY_PY_LWIP = 1
+# Picked up and expanded upon in mpconfigboard.h
+set(MICROPY_PY_LWIP ON)
+
+# Links cyw43-driver and sets:
+# MICROPY_PY_NETWORK_CYW43 = 1,
+# MICROPY_PY_SOCKET_DEFAULT_TIMEOUT_MS = 30000
+set(MICROPY_PY_NETWORK_CYW43 ON)
+
+# Adds mpbthciport.c
+# And sets:
+# MICROPY_PY_BLUETOOTH = 1,
+# MICROPY_PY_BLUETOOTH_USE_SYNC_EVENTS = 1,
+# MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE = 1
+set(MICROPY_PY_BLUETOOTH ON)
+
+# Links pico_btstack_hci_transport_cyw43
+# And sets:
+# MICROPY_BLUETOOTH_BTSTACK = 1,
+# MICROPY_BLUETOOTH_BTSTACK_CONFIG_FILE =
+set(MICROPY_BLUETOOTH_BTSTACK ON)
+
+# Sets:
+# CYW43_ENABLE_BLUETOOTH = 1,
+# MICROPY_PY_BLUETOOTH_CYW43 = 1
+set(MICROPY_PY_BLUETOOTH_CYW43 ON)
+
+set(MICROPY_FROZEN_MANIFEST ${MICROPY_BOARD_DIR}/manifest-wireless.py)
+
+set(PICO_BOARD "pimoroni_plasma2350w")
+set(PICO_BOARD_HEADER_DIRS ${CMAKE_CURRENT_LIST_DIR})

micropython/board/PIMORONI_PLASMA2350/pimoroni_plasma2350.h

@@ -0,0 +1,119 @@
+/*
+ * Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+// -----------------------------------------------------
+// NOTE: THIS HEADER IS ALSO INCLUDED BY ASSEMBLER SO
+//       SHOULD ONLY CONSIST OF PREPROCESSOR DIRECTIVES
+// -----------------------------------------------------
+
+// This header may be included by other board headers as "boards/pimoroni_plasma2350.h"
+
+// pico_cmake_set PICO_PLATFORM=rp2350
+
+#ifndef _BOARDS_PIMORONI_PLASMA2350_H
+#define _BOARDS_PIMORONI_PLASMA2350_H
+
+// For board detection
+#define PIMORONI_PLASMA2350
+
+// --- BOARD SPECIFIC ---
+#define SPICE_SPI 0
+#define SPICE_TX_MISO_PIN 8
+#define SPICE_RX_CS_PIN 9
+#define SPICE_NETLIGHT_SCK_PIN 10
+#define SPICE_RESET_MOSI_PIN 11
+#define SPICE_PWRKEY_BL_PIN 7
+
+#define PLASMA2350_SW_A_PIN 12
+
+#define PLASMA2350_CLK_PIN 14
+#define PLASMA2350_DATA_PIN 15
+
+#define PLASMA2350_LED_R_PIN 16
+#define PLASMA2350_LED_G_PIN 17
+#define PLASMA2350_LED_B_PIN 18
+
+#define PLASMA2350_I2C 0
+#define PLASMA2350_INT_PIN 19
+#define PLASMA2350_SDA_PIN 20
+#define PLASMA2350_SCL_PIN 21
+
+#define PLASMA2350_USER_SW_PIN 22
+
+#define PLASMA2350_A0_PIN 26
+#define PLASMA2350_A1_PIN 27
+#define PLASMA2350_A2_PIN 28
+#define PLASMA2350_NUM_ADC_PINS 3
+
+#define PLASMA2350_CURRENT_SENSE_PIN 29
+
+// --- RP2350 VARIANT ---
+#define PICO_RP2350A 1
+
+// --- UART ---
+// no PICO_DEFAULT_UART
+// no PICO_DEFAULT_UART_TX_PIN
+// no PICO_DEFAULT_UART_RX_PIN
+
+// --- LED ---
+#ifndef PICO_DEFAULT_LED_PIN
+#define PICO_DEFAULT_LED_PIN TINY2350_LED_G_PIN
+#endif
+// no PICO_DEFAULT_WS2812_PIN
+
+#ifndef PICO_DEFAULT_LED_PIN_INVERTED
+#define PICO_DEFAULT_LED_PIN_INVERTED 1
+#endif
+
+// --- I2C ---
+// routed to Qw/St connector
+#ifndef PICO_DEFAULT_I2C
+#define PICO_DEFAULT_I2C PLASMA2350_I2C
+#endif
+#ifndef PICO_DEFAULT_I2C_SDA_PIN
+#define PICO_DEFAULT_I2C_SDA_PIN PLASMA2350_SDA_PIN
+#endif
+#ifndef PICO_DEFAULT_I2C_SCL_PIN
+#define PICO_DEFAULT_I2C_SCL_PIN PLASMA2350_SCL_PIN
+#endif
+
+// --- SPI ---
+#ifndef PICO_DEFAULT_SPI
+#define PICO_DEFAULT_SPI 0
+#endif
+#ifndef PICO_DEFAULT_SPI_SCK_PIN
+#define PICO_DEFAULT_SPI_SCK_PIN SPICE_NETLIGHT_SCK_PIN
+#endif
+#ifndef PICO_DEFAULT_SPI_TX_PIN
+#define PICO_DEFAULT_SPI_TX_PIN SPICE_RESET_MOSI_PIN
+#endif
+#ifndef PICO_DEFAULT_SPI_RX_PIN
+#define PICO_DEFAULT_SPI_RX_PIN SPICE_TX_MISO_PIN
+#endif
+#ifndef PICO_DEFAULT_SPI_CSN_PIN
+#define PICO_DEFAULT_SPI_CSN_PIN SPICE_RX_CS_PIN
+#endif
+
+// --- FLASH ---
+#define PICO_BOOT_STAGE2_CHOOSE_W25Q080 1
+
+#ifndef PICO_FLASH_SPI_CLKDIV
+#define PICO_FLASH_SPI_CLKDIV 2
+#endif
+
+// pico_cmake_set_default PICO_FLASH_SIZE_BYTES = (4 * 1024 * 1024)
+#ifndef PICO_FLASH_SIZE_BYTES
+#define PICO_FLASH_SIZE_BYTES (4 * 1024 * 1024)
+#endif
+
+#ifndef PICO_RP2350_A2_SUPPORTED
+#define PICO_RP2350_A2_SUPPORTED 1
+#endif
+
+// no PICO_VBUS_PIN
+// no PICO_VSYS_PIN
+
+#endif

micropython/board/PIMORONI_PLASMA2350/pimoroni_plasma2350w.h

@@ -0,0 +1,137 @@
+/*
+ * Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+// -----------------------------------------------------
+// NOTE: THIS HEADER IS ALSO INCLUDED BY ASSEMBLER SO
+//       SHOULD ONLY CONSIST OF PREPROCESSOR DIRECTIVES
+// -----------------------------------------------------
+
+// This header may be included by other board headers as "boards/pimoroni_plasma2350.h"
+
+// pico_cmake_set PICO_PLATFORM=rp2350
+
+#ifndef _BOARDS_PIMORONI_PLASMA2350W_H
+#define _BOARDS_PIMORONI_PLASMA2350W_H
+
+// For board detection
+#define PIMORONI_PLASMA2350
+#define PIMORONI_PLASMA2350W
+
+// --- BOARD SPECIFIC ---
+#define SPICE_SPI 0
+#define SPICE_TX_MISO_PIN 8
+#define SPICE_RX_CS_PIN 9
+#define SPICE_NETLIGHT_SCK_PIN 10
+#define SPICE_RESET_MOSI_PIN 11
+#define SPICE_PWRKEY_BL_PIN 7
+
+#define PLASMA2350_SW_A_PIN 12
+
+#define PLASMA2350_CLK_PIN 14
+#define PLASMA2350_DATA_PIN 15
+
+#define PLASMA2350_LED_R_PIN 16
+#define PLASMA2350_LED_G_PIN 17
+#define PLASMA2350_LED_B_PIN 18
+
+#define PLASMA2350_I2C 0
+#define PLASMA2350_INT_PIN 19
+#define PLASMA2350_SDA_PIN 20
+#define PLASMA2350_SCL_PIN 21
+
+#define PLASMA2350_USER_SW_PIN 22
+
+#define PLASMA2350_A0_PIN 26
+#define PLASMA2350_A1_PIN 27
+#define PLASMA2350_A2_PIN 28
+#define PLASMA2350_NUM_ADC_PINS 3
+
+#define PLASMA2350_CURRENT_SENSE_PIN 29
+
+// -- CYW43 Wireless --
+#ifndef CYW43_DEFAULT_PIN_WL_HOST_WAKE
+#define CYW43_DEFAULT_PIN_WL_HOST_WAKE 24
+#endif
+
+#ifndef CYW43_DEFAULT_PIN_WL_REG_ON
+#define CYW43_DEFAULT_PIN_WL_REG_ON 23
+#endif
+
+#ifndef CYW43_WL_GPIO_COUNT
+#define CYW43_WL_GPIO_COUNT 3
+#endif
+
+#ifndef CYW43_WL_GPIO_LED_PIN
+#define CYW43_WL_GPIO_LED_PIN 0
+#endif
+
+// --- RP2350 VARIANT ---
+#define PICO_RP2350A 1
+
+// --- UART ---
+// no PICO_DEFAULT_UART
+// no PICO_DEFAULT_UART_TX_PIN
+// no PICO_DEFAULT_UART_RX_PIN
+
+// --- LED ---
+#ifndef PICO_DEFAULT_LED_PIN
+#define PICO_DEFAULT_LED_PIN TINY2350_LED_G_PIN
+#endif
+// no PICO_DEFAULT_WS2812_PIN
+
+#ifndef PICO_DEFAULT_LED_PIN_INVERTED
+#define PICO_DEFAULT_LED_PIN_INVERTED 1
+#endif
+
+// --- I2C ---
+// routed to Qw/St connector
+#ifndef PICO_DEFAULT_I2C
+#define PICO_DEFAULT_I2C PLASMA2350_I2C
+#endif
+#ifndef PICO_DEFAULT_I2C_SDA_PIN
+#define PICO_DEFAULT_I2C_SDA_PIN PLASMA2350_SDA_PIN
+#endif
+#ifndef PICO_DEFAULT_I2C_SCL_PIN
+#define PICO_DEFAULT_I2C_SCL_PIN PLASMA2350_SCL_PIN
+#endif
+
+// --- SPI ---
+#ifndef PICO_DEFAULT_SPI
+#define PICO_DEFAULT_SPI 0
+#endif
+#ifndef PICO_DEFAULT_SPI_SCK_PIN
+#define PICO_DEFAULT_SPI_SCK_PIN SPICE_NETLIGHT_SCK_PIN
+#endif
+#ifndef PICO_DEFAULT_SPI_TX_PIN
+#define PICO_DEFAULT_SPI_TX_PIN SPICE_RESET_MOSI_PIN
+#endif
+#ifndef PICO_DEFAULT_SPI_RX_PIN
+#define PICO_DEFAULT_SPI_RX_PIN SPICE_TX_MISO_PIN
+#endif
+#ifndef PICO_DEFAULT_SPI_CSN_PIN
+#define PICO_DEFAULT_SPI_CSN_PIN SPICE_RX_CS_PIN
+#endif
+
+// --- FLASH ---
+#define PICO_BOOT_STAGE2_CHOOSE_W25Q080 1
+
+#ifndef PICO_FLASH_SPI_CLKDIV
+#define PICO_FLASH_SPI_CLKDIV 2
+#endif
+
+// pico_cmake_set_default PICO_FLASH_SIZE_BYTES = (4 * 1024 * 1024)
+#ifndef PICO_FLASH_SIZE_BYTES
+#define PICO_FLASH_SIZE_BYTES (4 * 1024 * 1024)
+#endif
+
+#ifndef PICO_RP2350_A2_SUPPORTED
+#define PICO_RP2350_A2_SUPPORTED 1
+#endif
+
+// no PICO_VBUS_PIN
+// no PICO_VSYS_PIN
+
+#endif

micropython/board/PIMORONI_PLASMA2350/pins.csv

@@ -30,4 +30,7 @@ LED,GPIO17
 LED_R,GPIO16
 LED_G,GPIO17
 LED_B,GPIO18
-USER_SW,GPIO22
+USER_SW,GPIO22
+WL_GPIO0,EXT_GPIO0
+WL_GPIO1,EXT_GPIO1
+WL_GPIO2,EXT_GPIO2

micropython/board/RPI_PICO2/manifest-wireless.py

@@ -0,0 +1,8 @@
+require("bundle-networking")
+
+# Bluetooth
+require("aioble")
+
+include("manifest.py")
+
+freeze("$(BOARD_DIR)/../../modules_py", "lte.py")

micropython/board/RPI_PICO2/mpconfigboard.h

@@ -1,3 +1,52 @@
 // Board and hardware specific configuration
-#define MICROPY_HW_BOARD_NAME                   "Raspberry Pi Pico"
-#define MICROPY_HW_FLASH_STORAGE_BYTES          (PICO_FLASH_SIZE_BYTES - 1024 * 1024)
+#define MICROPY_HW_FLASH_STORAGE_BYTES          (PICO_FLASH_SIZE_BYTES - (2 * 1024 * 1024))
+
+// Set up networking.
+#define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT     "Pico2"
+
+#if defined(MICROPY_PY_NETWORK_CYW43)
+
+// CYW43 driver configuration.
+#define CYW43_USE_SPI                           (1)
+#define CYW43_LWIP                              (1)
+#define CYW43_GPIO                              (1)
+#define CYW43_SPI_PIO                           (1)
+
+#define MICROPY_HW_PIN_EXT_COUNT                CYW43_WL_GPIO_COUNT
+
+#if defined(CYW43_PIN_WL_DYNAMIC)
+
+#define CYW43_PIO_CLOCK_DIV_DYNAMIC             (1)
+
+// CYW43 default pin configuration
+#define CYW43_DEFAULT_PIN_WL_HOST_WAKE          24u
+#define CYW43_DEFAULT_PIN_WL_REG_ON             23u
+#define CYW43_DEFAULT_PIN_WL_DATA_OUT           CYW43_DEFAULT_PIN_WL_HOST_WAKE
+#define CYW43_DEFAULT_PIN_WL_DATA_IN            CYW43_DEFAULT_PIN_WL_HOST_WAKE
+#define CYW43_DEFAULT_PIN_WL_CLOCK              29u
+#define CYW43_DEFAULT_PIN_WL_CS                 25u
+
+// Slow down the wireless clock, since we'll be running
+// comms through wiring spaghetti!
+#define CYW43_PIO_CLOCK_DIV_INT                 50
+#define CYW43_PIO_CLOCK_DIV_FRAC                0
+#define CYW43_SPI_PROGRAM_NAME                  spi_gap0_sample1
+
+#endif
+
+#endif
+
+// Might be defined in mpconfigvariant_PPP.cmake
+// This is not checked by mpconfigport.h so we must set up networking below
+#if defined(MICROPY_PY_NETWORK_PPP_LWIP)
+
+// Nothing to do here?
+
+#endif
+
+// If a variant is not used, define a fallback board name
+#ifndef MICROPY_HW_BOARD_NAME
+
+#define MICROPY_HW_BOARD_NAME                   "Raspberry Pi Pico 2"
+
+#endif

micropython/board/RPI_PICO2/mpconfigvariant_WIRELESS.cmake

@@ -0,0 +1,40 @@
+# Override the MicroPython board name
+# And set basic options which are expanded upon in mpconfigboard.h
+list(APPEND MICROPY_DEF_BOARD
+    "MICROPY_HW_BOARD_NAME=\"Raspberry Pi Pico 2 (LTE + WiFi)\""
+    "MICROPY_PY_NETWORK=1"
+    "CYW43_PIN_WL_DYNAMIC=1"
+    "MICROPY_PY_NETWORK_PPP_LWIP=1"
+)
+
+# Links micropy_lib_lwip and sets MICROPY_PY_LWIP = 1
+# Picked up and expanded upon in mpconfigboard.h
+set(MICROPY_PY_LWIP ON)
+
+# Links cyw43-driver and sets:
+# MICROPY_PY_NETWORK_CYW43 = 1,
+# MICROPY_PY_SOCKET_DEFAULT_TIMEOUT_MS = 30000
+set(MICROPY_PY_NETWORK_CYW43 ON)
+
+# Adds mpbthciport.c
+# And sets:
+# MICROPY_PY_BLUETOOTH = 1,
+# MICROPY_PY_BLUETOOTH_USE_SYNC_EVENTS = 1,
+# MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE = 1
+set(MICROPY_PY_BLUETOOTH ON)
+
+# Links pico_btstack_hci_transport_cyw43
+# And sets:
+# MICROPY_BLUETOOTH_BTSTACK = 1,
+# MICROPY_BLUETOOTH_BTSTACK_CONFIG_FILE =
+set(MICROPY_BLUETOOTH_BTSTACK ON)
+
+# Sets:
+# CYW43_ENABLE_BLUETOOTH = 1,
+# MICROPY_PY_BLUETOOTH_CYW43 = 1
+set(MICROPY_PY_BLUETOOTH_CYW43 ON)
+
+set(MICROPY_FROZEN_MANIFEST ${MICROPY_BOARD_DIR}/manifest-wireless.py)
+
+set(PICO_BOARD "pico2_w")
+set(PICO_BOARD_HEADER_DIRS ${CMAKE_CURRENT_LIST_DIR})

micropython/board/RPI_PICO2/pico2_w.h

@@ -0,0 +1,116 @@
+/*
+ * Copyright (c) 2024 Raspberry Pi (Trading) Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+// -----------------------------------------------------
+// NOTE: THIS HEADER IS ALSO INCLUDED BY ASSEMBLER SO
+//       SHOULD ONLY CONSIST OF PREPROCESSOR DIRECTIVES
+// -----------------------------------------------------
+
+// This header may be included by other board headers as "boards/pico2_w.h"
+
+// pico_cmake_set PICO_PLATFORM=rp2350
+// pico_cmake_set PICO_CYW43_SUPPORTED = 1
+
+#ifndef _BOARDS_PICO2_W_H
+#define _BOARDS_PICO2_W_H
+
+// For board detection
+#define RASPBERRYPI_PICO2_W
+
+// --- RP2350 VARIANT ---
+#define PICO_RP2350A 1
+
+// --- UART ---
+#ifndef PICO_DEFAULT_UART
+#define PICO_DEFAULT_UART 0
+#endif
+#ifndef PICO_DEFAULT_UART_TX_PIN
+#define PICO_DEFAULT_UART_TX_PIN 0
+#endif
+#ifndef PICO_DEFAULT_UART_RX_PIN
+#define PICO_DEFAULT_UART_RX_PIN 1
+#endif
+
+// --- LED ---
+// no PICO_DEFAULT_LED_PIN - LED is on Wireless chip
+// no PICO_DEFAULT_WS2812_PIN
+
+// --- I2C ---
+#ifndef PICO_DEFAULT_I2C
+#define PICO_DEFAULT_I2C 0
+#endif
+#ifndef PICO_DEFAULT_I2C_SDA_PIN
+#define PICO_DEFAULT_I2C_SDA_PIN 4
+#endif
+#ifndef PICO_DEFAULT_I2C_SCL_PIN
+#define PICO_DEFAULT_I2C_SCL_PIN 5
+#endif
+
+// --- SPI ---
+#ifndef PICO_DEFAULT_SPI
+#define PICO_DEFAULT_SPI 0
+#endif
+#ifndef PICO_DEFAULT_SPI_SCK_PIN
+#define PICO_DEFAULT_SPI_SCK_PIN 18
+#endif
+#ifndef PICO_DEFAULT_SPI_TX_PIN
+#define PICO_DEFAULT_SPI_TX_PIN 19
+#endif
+#ifndef PICO_DEFAULT_SPI_RX_PIN
+#define PICO_DEFAULT_SPI_RX_PIN 16
+#endif
+#ifndef PICO_DEFAULT_SPI_CSN_PIN
+#define PICO_DEFAULT_SPI_CSN_PIN 17
+#endif
+
+// --- FLASH ---
+
+#define PICO_BOOT_STAGE2_CHOOSE_W25Q080 1
+
+#ifndef PICO_FLASH_SPI_CLKDIV
+#define PICO_FLASH_SPI_CLKDIV 2
+#endif
+
+// pico_cmake_set_default PICO_FLASH_SIZE_BYTES = (4 * 1024 * 1024)
+#ifndef PICO_FLASH_SIZE_BYTES
+#define PICO_FLASH_SIZE_BYTES (4 * 1024 * 1024)
+#endif
+// Drive high to force power supply into PWM mode (lower ripple on 3V3 at light loads)
+// note the SMSP mode pin is on WL_GPIO1
+
+#ifndef CYW43_WL_GPIO_COUNT
+#define CYW43_WL_GPIO_COUNT 3
+#endif
+
+#ifndef CYW43_WL_GPIO_LED_PIN
+#define CYW43_WL_GPIO_LED_PIN 0
+#endif
+
+// If CYW43_WL_GPIO_VBUS_PIN is defined then a CYW43 GPIO has to be used to read VBUS.
+// This can be passed to cyw43_arch_gpio_get to determine if the device is battery powered.
+// PICO_VBUS_PIN and CYW43_WL_GPIO_VBUS_PIN should not both be defined.
+#ifndef CYW43_WL_GPIO_VBUS_PIN
+#define CYW43_WL_GPIO_VBUS_PIN 2
+#endif
+
+// If CYW43_USES_VSYS_PIN is defined then CYW43 uses the VSYS GPIO (defined by PICO_VSYS_PIN) for other purposes.
+// If this is the case, to use the VSYS GPIO it's necessary to ensure CYW43 is not using it.
+// This can be achieved by wrapping the use of the VSYS GPIO in cyw43_thread_enter / cyw43_thread_exit.
+#ifndef CYW43_USES_VSYS_PIN
+#define CYW43_USES_VSYS_PIN 1
+#endif
+
+// The GPIO Pin used to monitor VSYS. Typically you would use this with ADC.
+// There is an example in adc/read_vsys in pico-examples.
+#ifndef PICO_VSYS_PIN
+#define PICO_VSYS_PIN 29
+#endif
+
+#ifndef PICO_RP2350_A2_SUPPORTED
+#define PICO_RP2350_A2_SUPPORTED 1
+#endif
+
+#endif

micropython/board/manifest_pico2.py

@@ -1,5 +1,8 @@
 MODULES_PY = "../../../pimoroni-pico/micropython/modules_py"
 
+# SD Card
+require("sdcard")
+
 freeze(MODULES_PY, "gfx_pack.py")
 
 freeze(MODULES_PY, "pimoroni.py")

micropython/examples/pico_plus_2/breakouts/lte-breakout.py

@@ -0,0 +1,38 @@
+import lte
+import time
+import requests
+from machine import Pin, PWM
+
+
+MOBILE_APN = "Your APN Here"
+
+# Setting this to True will attempt to resume an existing connection
+RESUME = False
+
+# Fix the eye-searing brightness of the onboard LED with PWM
+class Netlight:
+    def __init__(self):
+        self.pin = PWM(Pin("LED", Pin.OUT), freq=1000)
+
+    def value(self, value):
+        self.pin.duty_u16(value * 2000)
+
+
+con = lte.LTE(MOBILE_APN, netlight_led=Netlight(), skip_reset=RESUME)
+con.start_ppp(connect=not RESUME)
+
+# Do some requests! Internet stuff should just work now.
+try:
+    t_start = time.time()
+    for x in range(2):
+        req = requests.get("https://shop.pimoroni.com/robots.txt")
+        print(req)
+
+finally:
+    t_end = time.time()
+
+    print(f"Took: {t_end - t_start} seconds")
+
+    print("Disconnecting...")
+    con.stop_ppp()
+    print("Done!")

micropython/modules_py/lte.py

@@ -0,0 +1,220 @@
+from machine import UART, Pin
+from network import PPP
+from micropython import const
+import time
+
+
+DEFAULT_PIN_RST = 35
+DEFAULT_PIN_NETLIGHT = 34
+DEFAULT_PIN_RX = 33
+DEFAULT_PIN_TX = 32
+DEFAULT_UART_ID = 0
+
+DEFAULT_UART_TIMEOUT = const(1)
+DEFAULT_UART_TIMEOUT_CHAR = const(1)
+DEFAULT_UART_RXBUF = const(1024)
+DEFAULT_UART_STARTUP_BAUD = const(115200)
+DEFAULT_UART_BAUD = const(460800)
+
+
+class CellularError(Exception):
+    def __init__(self, message=None):
+        self.message = f"CellularError: {message}"
+
+
+class LTE():
+    def __init__(self, apn, uart=None, reset_pin=None, netlight_pin=None, netlight_led=None, skip_reset=False):
+        self._apn = apn
+        self._reset = reset_pin or Pin(DEFAULT_PIN_RST, Pin.OUT)
+        self._uart = uart or UART(
+            DEFAULT_UART_ID,
+            tx=Pin(DEFAULT_PIN_TX, Pin.OUT),
+            rx=Pin(DEFAULT_PIN_RX, Pin.OUT))
+
+        # Set PPP timeouts and rxbuf
+        self._uart.init(
+            timeout=DEFAULT_UART_TIMEOUT,
+            timeout_char=DEFAULT_UART_TIMEOUT_CHAR,
+            rxbuf=DEFAULT_UART_RXBUF)
+
+        if not skip_reset:
+            self._reset.value(0)
+            time.sleep(1.0)
+            self._reset.value(1)
+
+        if netlight_led:
+            self._led = netlight_led
+            self._netlight = netlight_pin or Pin(DEFAULT_PIN_NETLIGHT, Pin.IN)
+            self._netlight.irq(self._netlight_irq)
+
+    def _netlight_irq(self, pin):
+        self._led.value(pin.value())
+
+    def ipconfig(self, *args, **kwargs):
+        if len(args):
+            return self._ppp.ipconfig(*args)
+        else:
+            return self._ppp.ipconfig(**kwargs)
+
+    def iccid(self):
+        try:
+            return self._send_at_command("AT+CICCID", 1)
+        except CellularError:
+            return None
+
+    def status(self):
+        lte_status = self._send_at_command("AT+CEREG?", 1)
+        gsm_status = self._send_at_command("AT+CGREG?", 1)
+        return lte_status, gsm_status
+
+    def signal_quality(self):
+        try:
+            response = self._send_at_command("AT+CSQ", 1)
+            quality = int(response.split(":")[1].split(",")[0])
+            db = -113 + (2 * quality)  # conversion as per AT command set datasheet
+            return db
+        except CellularError:
+            pass
+        return None
+
+    def stop_ppp(self):
+        self._ppp.disconnect()
+        self._send_at_command(f"AT+IPR={DEFAULT_UART_STARTUP_BAUD}")
+        self._flush_uart()
+
+    def start_ppp(self, baudrate=DEFAULT_UART_BAUD, connect=True):
+        self._wait_ready(poll_time=1.0, timeout=30)
+
+        # Switch to a faster baudrate
+        self._send_at_command(f"AT+IPR={baudrate}")
+        self._flush_uart()
+        self._uart.init(
+            baudrate=baudrate,
+            timeout=DEFAULT_UART_TIMEOUT,
+            timeout_char=DEFAULT_UART_TIMEOUT_CHAR,
+            rxbuf=DEFAULT_UART_RXBUF)
+        self._wait_ready(poll_time=1.0)
+
+        # Connect!
+        if connect:
+            self.connect()
+
+        # This will just always time out!?
+        # try:
+        #    self._send_at_command("ATD*99#", timeout=300)
+        # except CellularError as e:
+        #    print(e)
+
+        # Force PPP to use modem's default settings...
+        self._flush_uart()
+        self._uart.write("ATD*99#\r")
+        self._uart.flush()
+
+        self._ppp = PPP(self._uart)
+        self._ppp.connect()
+        while self._ppp.status() != 4:
+            time.sleep(1.0)
+
+        return self._ppp.ifconfig()
+
+    def connect(self, timeout=60):
+        print("  - setting up cellular uart")
+        # connect to and flush the uart
+        # consume any unsolicited messages first, we don't need those
+        self._flush_uart()
+
+        print("  - waiting for cellular module to be ready")
+
+        # wait for the cellular module to respond to AT commands
+        self._wait_ready()
+
+        self._send_at_command("ATE0")  # disable local echo
+        self._send_at_command(f"AT+CGDCONT=1,\"IP\",\"{self._apn}\"")  # set apn and activate pdp context
+
+        # wait for roaming lte connection to be established
+        giveup = time.time() + timeout
+        status = None
+        while status != "+CEREG: 0,5" and status != "+CEREG: 0,1":
+            status = self._send_at_command("AT+CEREG?", 1)
+            time.sleep(0.25)
+            if time.time() > giveup:
+                raise CellularError("timed out getting network registration")
+
+        # disable server and client certification validation
+        self._send_at_command("AT+CSSLCFG=\"authmode\",0,0")
+        self._send_at_command("AT+CSSLCFG=\"enableSNI\",0,1")
+
+        print(f"  - SIM ICCID is {self.iccid()}")
+
+    def _wait_ready(self, poll_time=0.25, timeout=10):
+        giveup = time.time() + timeout
+        while time.time() <= giveup:
+            try:
+                # if __send_at_command doesn't throw an exception then we're good!
+                self._send_at_command("AT")
+                return
+            except CellularError as e:
+                print(e)
+                time.sleep(poll_time)
+
+        raise CellularError("timed out waiting for AT response")
+
+    def _flush_uart(self):
+        self._uart.flush()
+        time.sleep(0.25)
+        while self._uart.any():
+            self._uart.read(self._uart.any())
+            time.sleep(0.25)
+
+    def _send_at_command(self, command, result_lines=0, timeout=5.0):
+        # consume any unsolicited messages first, we don't need those
+        self._flush_uart()
+
+        self._uart.write(command + "\r")
+        self._uart.flush()
+        status, data = self._read_result(result_lines, timeout=timeout)
+
+        print("  -", command, status, data)
+
+        if status not in ["OK", "DOWNLOAD"]:
+            raise CellularError(f"non 'OK' or 'DOWNLOAD' result for command {command}")
+
+        if result_lines == 1:
+            return data[0]
+        if result_lines > 1:
+            return data
+        return None
+
+    def _read_result(self, result_lines, timeout=1.0):
+        status = None
+        result = []
+        start = time.ticks_ms()
+        timeout *= 1000
+        while len(result) < result_lines or status is None:
+            if (time.ticks_ms() - start) > timeout:
+                raise CellularError("cellular module timed out")
+
+            line = self._uart.readline()
+
+            if line:
+                line = line.strip()
+                if line in [b"OK", b"ERROR", b"DOWNLOAD"]:
+                    status = line.decode("ascii")
+                elif line != b"":
+                    result.append(str(line, "ascii"))
+                start = time.ticks_ms()
+
+        return status, result
+
+    def send_text_message(self, recipient, body, timeout=5.0):
+        self._uart.write("AT+CMGS=\"")
+        self._uart.write(recipient.encode("ascii"))
+        self._uart.write(b"\"\r")
+        time.sleep(0.5)
+        self._uart.write(body.encode("ascii"))
+        self._uart.write(b"\x1a\r")
+        self._uart.flush()
+
+        status, _ = self._read_result(1, timeout=timeout)
+
+        return status == "OK"